Updating to the latest code level

These instruction assume:
Server name:			myserver
Server IP address:		               10.1.2.100
Server net mask:			255.255.255.0
Server target directory/file:	/usr/8371load//8371.img
8371 IP address:			10.1.2.4
8371 net mask:			255.255.255.0
Get the latest level of software on your server
1. Describe here how to get to the IBM site and locate the image
2. FTP the file to myserver as /usr/8371load/8371.img
3. Permissions on all parent directories and 8371.img must allow all users read access

Prepare the 8371
1. Boot the 8371.
2. Verify IP host connectivity by doing a ping from the 8371 to myserver.  
From the * prompt:
*PING 10.1.2.100
PING 10.1.2.4 -> 10.1.2.100: 56 data bytes, ttl=64, ... every 1 sec.
56 data bytes from 10.1.2.100: icmp_seq=0. ttl=254. time=0. ms
56 data bytes from 10.1.2.100: icmp_seq=1. ttl=254. time=0. ms
----10.1.2.100 PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 0/0/0 ms
Load the image on the 8371
1. Access the Change Management Configuration
From the * prompt:
*talk 6
Gateway user configuration
Config>

From the  Config> prompt:
Config> boot
Boot Configuration
Boot config>
2. Initiate the TFTP file transfer between the 8371 and remote server
From the Boot config> prompt:
Boot config> tftp get load

Example: 
Boot config>tftp get load
+------ BankA -----------+--------- Description ----------+------ Date -------+
| IMAGE - NONE 	 	|				     | 01 Jan 1970 01:03 |
| CONFIG 1 - AVAIL 	| test config for pubs 	     | 01 Jan 1970 00:01 |
| CONFIG 2 - AVAIL * 	| test config for pubs 	     | 01 Jan 1970 01:13 |
+------ BankB -----------+--------- Description ----------+------ Date -------+
| IMAGE - ACTIVE 	       |				     | 01 Jan 1970 00:01 |
| CONFIG 1 - AVAIL 	| test config for pubs 	     | 01 Jan 1970 00:54 |
| CONFIG 2  AVAIL	| 				     | 01 Jan 1970 00:01 |
+------------------------+--------------------------------+-------------------+
* - Last Used Config L - Config File is Locked
Specify the server IP address (dotted decimal): [1.2.3.4] 10.1.2.100
Specify the remote file name: (/u/bin) /usr/8371load/8371.img
Select the destination bank: (A, B, F): [A] a
TFTP SW load image
get: /usr/8371load/8371.img
from: 10.1.2.100
to: bank A.
Operation completed successfully.

Note:
The image marked as active can not be modified by any change management commands.

